Installation

Step by step:

This installation is designed for dry wall only.

Step 1

Measure and mark the wall, placing the first tile in the middle on the bottom row on the wall starting from the middle upwards. Use a level to ensure the tile is perfectly leveled and carefully drill the provided dry wall screws on all four tabs.

Step 2

Slide the next tile in from the side, ensuring they are perfectly aligned.

Step 3

Then drill the screws on the remaining three tabs while ensuring the tile stays straightened, applying pressure to the tile with your other hand.

Step 4

After the first row is complete, move to the second row and start with a tile in the middle. Going from inward to outward, repeating the same steps as above.

Step 5

Repeat the same process for all the remaining rows.

Step 6

Next put the corner tabs on all four corners and drill two screws on each side.

Step 7

Slide the border panels in and press down.

Step 8

You are now done. Enjoy your finished wall accent!